Specification Gasoline vibrator parameter: Model GX35 Power 1.2HP Rotate Speed 5200r/min Length 2-6m Weight 25kg Drive system Flexible shaft Engine Four-stroke air-cooled gasoline engine Gasoline Volume 0.65L Dimension 25001400960 Electric vibrator parameter Power Force 100-400N Engine 3/single Phase Frequency 4500HZ Power 0.065KW Rotate Speed 4500r/min Voltage 380v/220v Shaft Length 1-4m Driven system Electric vibrator Paving speed 30m/h Walking Speed 30m/h Weight 15kg Paving Thickness 10cm Dimension 600460760 Caution It should be noted that the oil cup add 79ml oil chassis, do not add more, otherwise it is easy to reverse the interior of the cylinder, causing smoke and other adverse conditions, this time. GX35 4stroke 37.7CC Gas Concrete Wet Screed Power Screed Cement 1-6M level ruler. Concrete Power Screed without any leveling ruler.
Suitable with 1-6M leveling ruler(not include leveling ruler). The power screed is ideal for smoothing, leveling, and placing concrete on a horizontal surface.It is powered by a 4 stroke motor. Gas powered screeds not only are easier to use, require less manpower but also do a majority of the bull floating too. The ergonomical design and rubber isolators reduce vibration making the job easier for the operator. Screed is the best solution for cutting the time to 1/4 compared to the traditional method while at the same time leaving a superior finish. Powered by 37.7cc Commercial Grade Engine.
And comes with vibration isolators for comfort. Ergonomically Designed for easy use. 4 cycle gasoline engine power a well engineered and field proven eccentric system to frequencies up to 5200 rpm. Swapping out beam lengths is easy which assures that you always have the right length for your project.A strong, light weight frame allows the leveling rulers to be changed in seconds. Lightweight Power unit and frame making it easy to maneuver and transport around the site. Kick stand comes standard for keeping the motor upright and out of the cement.
Concrete Vibrator mainly made up by the motor, transmission, scraper, vibrator, handle five major components. Working principle: Concrete vibrator, is a vibrator floating on the concrete surface for direct tamping. It is attached to the vibrator mounted on the plate, work, through the plate chassis vibration will be introduced into the interior from the surface and the concrete fizzy. This type of vibrator is mainly applied to a large area of vibration, the thickness of the small cement concrete pavement, deck and concrete precast panels, etc.
It should be noted that the oil cup add 79ml oil chassis, do not add more, otherwise it is easy to reverse the interior of the cylinder, causing smoke and other adverse conditions, this time put the machine down, pour out the oil, the machine can then run for a while Back to normal. Change the oil every three days and remove the air bubbles before starting. This item is in the category "Business & Industrial\Light Equipment & Tools\Concrete Vibrators".
The seller is "greatdeshop2019" and is located in this country: US. This item can be shipped to United States.