80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER

80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER
80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER
80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER
80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER
80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER
80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER
80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER
80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER
80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER

80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER
80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER. MONSTER HYPERFIRE RUNFAST TM 2-stroke 66cc/80cc SUPERPOWER Motorized Bike ENGINE KIT AND SUPER 26 POWER MOUNTAIN BIKE COMPLETE DO IT YOURSELF BIKE AND MOTOR SYSTEM MOTORIZED BICYCLE KITS SUPERFIRE WITH PERFORMANCE UPGRADES. HIGH PERFORMANCE MONSTER HYPERFIRE RUNFAST TM 2-stroke 66cc/80cc SUPERPOWER Motorized Bike ENGINE KIT AND AWESOME 26 POWER MOUNTAIN BIKE COMPLETE DO IT YOURSELF BIKE AND MOTOR SYSTEM MOTORIZED BICYCLE KITS SUPERFIRE WITH PERFORMANCE UPGRADES SUPER ADVANCED! BENEFITS OF THE HIGH PERFORMANCE MONSTER HYPERFIRE RUNFAST TM 2-stroke 66cc/80cc SUPERPOWER Motorized Bike ENGINE KIT AND AWESOME 26 POWER MOUNTAIN BIKE COMPLETE DO IT YOURSELF BIKE AND MOTOR SYSTEM MOTORIZED BICYCLE KITS SUPERFIRE WITH PERFORMANCE UPGRADES SUPER ADVANCED.

MOTORS ARE ASSEMBLED IN THE USA FOR ENHANCED INSPECTION AND QUALITY ASSURANCE. HUGE 40mm INTAKE FOR MONSTER GAS/AIR FLOW. WIDER 40mm FRONT MOUNT FOR EASIER FITTING! SUPER RUGGED THICK 8mm FRONT AND REAR MOUNTING STUDS! DUAL FIRE SPARK PLUG IGNITION WITH SUPER HOT UPDGRADED PLASMA DUAL CABLE CDI!!

UPGRADED MEGA MAGNET ROTOR MUCH STRONGER THAN STANDARD ENGINES FOR EXTREME PERFORMANCE! CONAN THE BARBARIAN STRONG 415H HEAVY DUTY CHAIN!! 4-BOLT ULTRA TOUGH 8mm BOLT CHAIN TENSIONER WITH LOCKING BOLT AND LOCKING SNAP CLIP FOR NO-LOSE WHEEL!!! BONUS SUPER CHARGED 12 VOLT MAGNETO FOR ULTIMATE FIRE POWER!!

FANTASTIC FUEL MILEAGE OF 100 MPG. SIMPLE PEDAL, POP THE CLUTCH, TURN THE THROTTLE, AND GO STARTING ACTION. MEGA HOT MOTORIZED BIKE SPARK PLUG. MOTOR MOUNTING COMPONENTS AND HARDWARE. A MEGAPOWERED complete 2-stroke 66cc/80cc high performance MOTORIZED BIKE engine kit for converting your bike!

26 POWER MOUNTAIN BICYCLE WITH FRONT AND REAR BRAKES, SEAT. RUNFAST UPGRADED HIGH PERFORMANCE HYPERFIRE TM RF-80 ADVANCED ULTRA PERFORMANCE 2-STROKE MOTOR. PLASMA HOT TM DUAL CDI IGNITION COIL. 1/2 GALLON MONSTER GAS TANK. THROTTLE GRIP AND HANDLEBAR GRIP. SUPERFIRE TMEXHAUST POWER PIPE TUNED EXPANSION CHAMBER. LET US HELP GET YOU STARTED ON THE ROAD TO FUN AND EXCITEMENT WITH MOTORIZED BICYCLING!

WHY RUNFAST IS THE HIGHEST QUALITY MOTORIZED BIKE ENGINE KIT IN THE WORLD. Heavier, stronger magnet rotor for more power!

Other cheap bike engines use weaker, less powerful magnet rotors. Thicker, stronger, longer, stronger magneto cable wires for improved power transfer and better reach. Heavier, thicker cylinder bodies and crank case for strength and durability! Heavy duty metal engine for added strength and durability.

Wider front mount for better bike fitting accommodations of all bikes. Front and rear mounting studs are rugged thick 8mm. Cheap low quality kits use thin, brittle studs that break off. Enhanced universal motor mount clamp bracket for seamless bike tube front mounting.

High quality advanced u-bolt 8mm universal motor mount plate 8.8 grade 8mm bolts and nuts for ultra hold and grip. High grade 8.8 standard for all bolting hardware. The low quality cheap kits use 4.4 grade that strip threads easily. Ungraded nylon insert lock nuts to prevent loosening.

Low quality cheap bike engine kits use standard nuts that loosen over time. Balanced, heavy duty quality crank assembly with smooth rides. Short crank rod for more power.

Cheaper low quality bicycle engines use lightweight poorly balanced assemblies with the longer rod with less power. Longer camshaft arms for easier disengagement. Superior, longer clutch handle lever with correct (not inferior locking lever). No button locking mechanism means that your button doesn't pop.

Off (common for cheap low quality kits). Higher quality throttle grips that beat the low quality cheap brittle plastic connections that break after the first ride. Thicker kill switch cables not the low quality thin and cheap kill switch cables from the cheap low quality kits. Superior woven throttle cable for super slick easy to twist throttle action. Cheaper, lower quality engine kits have cables that bind up in the cable housing promoting excess wear/damage on throttle grip.

Higher quality, thicker bevel gear grease for superior lubrications. Rugged, thicker high quality 8mm 4 bolt grade 8.8 chain tensioner for stronger, tighter frame grip. Cheaper, lower quality motorized bike kits use weak 6mm bolts and/or 2 bolt weak gripping connections and inferior 4.4 grade cheap stripping bolts.

Superior chain tensioner pulley wheel with locking bolt. No need to jam a screwdriver in the back to tighten wheel.

Superior pulley wheel with locking snap clip to prevent pulley from falling off of bearing! Cheap low quality kits don't include this and have their pulleys fall off every time with disastrous consequences. Super thick heavy duty rear wheel sprockets!

Low quality cheap motorized bike kits use thin, easy to warp sprockets that wobble and throw chains for disaster. Ultra heavy duty 415H chain standard for superior strength ride after ride. Low quality cheap motorized bike kits use 415 weak thin chains that break and snap. High quality speed carburetors with correct tension throttle springs. Cheap low quality kits use stiff inappropriately tensioned springs causing excess throttle resistance and throttle grip damage.

Super wide 40mm intake for optimal air/gas flow. Cheap low quality kits use narrow 32mm intakes for inferior flow and weak running. Superior hardened steel bucking bar for ultimate durability every time you need to disengage the clutch. Cheap low quality kits use cheap, low quality metal bucking bars that quickly wear down preventing proper clutch disengagement.

Wider, more accommodating gas tank straps for easier mounting unlike the cheap low quality thin and stiff gas tank straps from. Higher quality fuel valve with superior stiff thick rubber gasket to allow for proper position of the gas valve unlike the cheap low quality motorized bike kits that provide thin red washer that prevents proper tank valve position crucial in opening and closing of the gas valve. High quality fuel filter unlike the low quality cheap filters that the low quality cheap motorized bike kits provide. Longer, stronger high quality fuel line unlike the cheap low quality short gas line from cheap low quality motorized bike kits. Low quality cheap motorized bike kits.

The cheap low quality bike engine kits don't care and don't understand the details that make a quality motorized bike engine kit. With better qualities you save yourself from the headaches of cheap trash breaking down. Super fuel-efficient, only consuming 2.5 litre fuel per 100km.

Comes with all needed hardware for easy installation. Fit for most type 26" and 28" and 29 bikes, such as mountain bikes, road. Mode of Engine:Single cylinder, air-cooling, 2-stroke. Bore & Stroke:47mm & 40mm.

HYPERFIRE DUAL SUPER HOT Ignition Mode:CDI. Model of Chain: 415H HEAVY DUTY. Lubrication Oil: oil of 2-stroke petrol engine (2-Cycle). Mixing Ratio of Fuel and engine Oil:5 oz oil per 1 gallon gas for new sets, 4 oz oil per 1 gallon after running 500km.

Type of Sparking Plug:Z4C 14MM. Volume of oil Consumption:2.5L/100km.

Type of Clutch:Friction Plate / Dry. Cooling Mode:Natural air cooling.

1x 80cc 2-stroke engine(the putt is bent). 1x MIGHTYMAXX MULTITOOTH Sprocket clamp assembly with hardware. 1x HYPERFIRE SUPERPOWER PERFORMANCE PIPE Exhaust muffler. 1x Bearing chain tensioner / idler.

1x HYPERFIRE SUPER HOT DUAL CDI ignition coil. 1x Kill switch (on throttle). 1x Black gas tank with mounting brackets. All the needed mounting brackets, gaskets, and hardware. The kit includes all the parts and instructions necessary to convert your bike.

Please also keep in mind that the motor will use a mix of gasoline and 2-cycle oil. The oil is used as a lubricant. Without it, the performance and longevity of the motor will be reduced. Please refer to the manual for further information including gasoline/oil ratios. PO BOX address is 100% acceptable.

Please make sure the address is correct before you pay. We have warehouses in the USA. E-mails are answered Monday through Sunday.

Please allow up to 8 hour for a response to your message because we might be sleeping. ASSEMBLE, RIDE AND USE AT OWN RISK. ASSEMBLY AND MOTOR INSTALLATION REQUIRED.

RIDING A MOTORIZED BICYCLE CAN BE DANGEROUS AND HAS THE POTENTIAL TO CAUSE SERIOUS INJURY AND EVEN DEATH. AN OPERATOR OF MOTORIZED BICYCLES, PRODUCTS, AND SERVICES INSTALL/ASSEMBLE/RIDE AT HIS/HER OWN RISK. AS THE PURCHASER YOU UNDERSTAND AND ACCEPT ALL AND ANY SEEABLE AND UNFORSEEABLE RISKS BASED ON MAINTENANCE, STRUCTURAL INTEGRITY, OPERATION, WEATHER, ROAD CONDITIONS, TRAFFIC, ETC.

IT IS STRONGLY ENCOURAGED THAT A TRAINED MECHANIC INSPECT ALL ASPECTS OF THE MOTORIZED BICYCLE BEFORE RIDING TO CONFIRM SUITABILITY. CUSTOMERS WHO ARE NOT MECHANICALLY INCLINED OR UNFAMILIAR WITH MOTORIZED BICYCLES ARE STRONGLY ADVISED TO SEEK HELP BEFORE ATTEMPTING TO MAINTAIN, FIX, OR INSTALL ANY ASPECT OF A MOTORIZED BICYCLE. THIS INCLUDES THE ADDITION OF HEAVY-DUTY STRAPS, SUPPORT SCREWS, THREAD LOCK, AND PRESSURE-DISTRIBUTING WASHERS.

FENDERS THAT ARE NOT PROPERLY REINFORCED CAN BREAK AT THE CONNECTIONS AND FALL INTO THE WHEELS. THIS CAN LEAD TO SERIOUS ACCIDENTS, INJURIES AND EVEN DEATH. IT IS STRONGLY ADVISED THAT CUSTOMERS WHO WANT TO FULLY REMOVE THIS RISK OF POTENTIAL DANGER RIDE THE MOTORIZED BICYCLE WITHOUT THE USE OF FENDERS.

WHEN OPERATING A MOTORIZED BICYCLE ALWAYS. Use front and rear lights when riding at night. Wear a properly-mounted and fastened bicycle or motorcycle helmet.

Wear bright and conspicuously-colored clothing. Wear gloves, pants, and closed-toed shoes. Travel at the lowest speed possible (NO MORE THAN 10-15 MPH) to avoid serious accidents, injuries and death. Obey all state and city traffic laws, ordinances and, speed limits on and off the road. Practice riding the motorized bicycle in an open area free from traffic to become familiar with motorized riding.

Plan out and use a safe route to ride where traffic is at a minimum. Be aware of the traffic while riding on the road and use caution especially when merging, making left turns, and moving through intersections. Inspect the motorized bicycle before riding and make any necessary adjustments and/ or repairs. Maintain the motorized bicycle on a regular basis to ensure its integrity and proper functionality. Use caution when dealing with gasoline. It is volatile, flammable and combustible. Do not smoke when operating a motorized bicycle. PURCHASER AND USER OF THIS ITEM MUST BE 18 YEARS OF AGE OR OLDER. IF YOU DO NOT READ AND AGREE TO THE TERMS, WARNINGS, PRECAUTIONS, AND INSTRUCTIONS, INCLUDED IN THE WEBSITE, THIS LISTING AND THE PACKAGE FOR ANY REASON DO NOT USE THIS PRODUCT. Here are the specs of the standard motorized bike kit THAT THE CHEAP COMPETITORS SELL. They do not compare to the high quality of RUNFAST USA. Promote your bicycle performance by refitting!

Maybe you need a new engine for more wonderful riding experience! So lucky for you to meet our IE47FA 80cc Bike Refit Engine Riding Assistant! As to this item, it adopts first-rate steel material, of great strength and hardness for endurance. It comes with fuel tank, silencer, electronic igniter and other accessories for convenient operation.

All these gadgets are ensured for high quality and reliability. It is quite easy to refit your bicycle. A complete engine kit for converting your bike. Heavy duty metal engine body for added durability.

Fit for most type 24", 26"and 28. Engine Mode: Single Cylinder, Air-cooling, 2-stroke. Chain Length: 110 links, 55 inches. Rated Power: 2.5Kw/5000r/min(3 horsepower/5000r/min).

Power: 3.5Kw/6000r/min(5-6 horsepower/6000r/min). Type of Sparking Plug: Z4C 14MM. Type of Clutch: Friction Plate / Dry.

Lubrication Oil: Motorcycle Synthetic 2 Stroke Oil. Mixing Ratio of Fuel and Engine Oil: 16:1 for Break Period(First 300 Miles), 25: 1 after. Net Weight: 23.15 lbs / 10.5 kg. Suitable for: 24", 26" or 28 Bicycle. 1x Ignition coil & CDI. 1x 44T Sprocket W/ 9 Hole Clamp Pads.

1x Fuel tank, Fuel filter. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Other Motorcycle Parts". The seller is "umotomotorizedbicycles" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Croatia, Republic of, Malaysia, Brazil, Colombia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.


80cc 2 Stroke Gas Engine Motor Kit And 26 Mt Bike DIY MOTORIZED BIKE BIG POWER


Homepage   Map   Contact   Privacy Policy Agreement   Service Agreement